spiral retaining ringspiral retaining ringspiral retaining ringspiral retaining ring
  • spiral retaining ring
  • spiral retaining ring
  • spiral retaining ring
  • spiral retaining ring

Borrelly 360 Retaining Rings

Borrelly 360 multi-turn internal and external spiral retaining rings are made by coiling the ring from laminated flat wire with round edges.

Borrelly Spring Washers makes retaining rings from 5 mm to 1000 mm diameter; 1 turn to 7 turns; Austenitic (AISI 301 - AISI 302 - AISI 316), Semi-austenitic (17-7 PH), Inconel, Hastelloy, CuBe2, Duplex, Super Duplex.

BORRELLY 360 Retaining Rings

Available as standard: 2 ranges 360 rings for shaft or bore, meeting the MA4016 and MA4017 standards of the aeronautics industries.

Technical description

Technical description

Show

SPIRAL RETAINING RINGS

Borrelly 360 retaining rings for multi-turn bores and shafts are made by coiling a ring from laminated flat wire with round edges.

They are manufactured with a notch; this make is extremely easy to remove from a groove.

Anneau extérieur / Anneau intérieur

BENEFITS

Anneau d'arrêt vs circlips

Compared to stamped retaining rings (circlips), the benefits of the Borrelly 360 ring are:

  • No tooling costs
  • No assembly lugs
  • A 360° retaining surface
  • Easy to install and remove

 

INSTALLING / REMOVING A SPIRAL RETAINING RINGS

Manual, semi-automated or automated installation of a Borrelly 360 retaining ring can be carried out using a simple assembly cone.

Montage anneau d'arrêt

A standard screwdriver can be used to remove a Borrelly 360 retaining ring from its groove (whereas a special pliers is needed to remove a stamped circlip from a groove.

 

Applications

Anneau d'arrêt externe pour arbre

Borrelly 360 2-turn external retaining ring for shaft

Anneau d'arrêt - Arbre

Borrelly 360 4-turn internal retaining ring for bore

 

Custom design request

We study your needs to design your custom spring washers.

Custom design request

COMPLIANCE

99,8 %

RELIABILITY

95,9 %

SERVICE

48 H