Products

All sectors

  • Leading-edge sector

    Shaft range following MA4016

    360 Retaining Rings AFE018217107I10

    • Material :Stainless steel 1.4310
    • Shaft diameter (mm) :18
    • Inside diameter of the ring (mm) :16.635 ±0.165
    • Width of the ring (mm) :1.65
    • Thickness of the ring (mm) :1.07 ±0.05
    • Groove diameter (mm) :16.92 ±0.075
    • Groove width (mm) :1.2 - 1.28
    • Groove resistance (kN) :4.73
    • Shear strenght (kN) :20.15

  • Leading-edge sector

    Shaft range following MA4016

    360 Retaining Rings AFE035230127I10

    • Material :Stainless steel 1.4310
    • Shaft diameter (mm) :35
    • Inside diameter of the ring (mm) :32.275 ±0.165
    • Width of the ring (mm) :3
    • Thickness of the ring (mm) :1.27 ±0.05
    • Groove diameter (mm) :32.8 ±0.1
    • Groove width (mm) :1.4 - 1.5
    • Groove resistance (kN) :18.75
    • Shear strenght (kN) :40.41

  • Leading-edge sector

    Shaft range following MA4016

    360 Retaining Rings AFE058235125I10

    • Material :Stainless steel 1.4310
    • Shaft diameter (mm) :58
    • Inside diameter of the ring (mm) :55.115 ±0.315
    • Width of the ring (mm) :3.51
    • Thickness of the ring (mm) :1.25 ±0.08
    • Groove diameter (mm) :56.01 ±0.15
    • Groove width (mm) :1.42 - 1.52
    • Groove resistance (kN) :28.25
    • Shear strenght (kN) :65.91

  • Leading-edge sector

    Shaft range following MA4016

    360 Retaining Rings AFE078243155I10

    • Material :Stainless steel 1.4310
    • Shaft diameter (mm) :78
    • Inside diameter of the ring (mm) :74.46 ±0.38
    • Width of the ring (mm) :4.27
    • Thickness of the ring (mm) :1.55 ±0.08
    • Groove diameter (mm) :75.55 ±0.15
    • Groove width (mm) :1.73 - 1.86
    • Groove resistance (kN) :46.73
    • Shear strenght (kN) :109.91

  • Leading-edge sector

    Bore range according to MA4017 standard

    360 Retaining Rings AFI020219089I10

    • Material :Stainless steel 1.4310
    • Housing diameter (mm) :20
    • External diameter of the ring (mm) :21.685 ±0.175
    • Width of the ring (mm) :1.88 ±0.10
    • Thickness of the ring (mm) :0.89 ±0.05
    • Groove diameter (mm) :21.22 ±0.075
    • Groove width (mm) :1.00 - 1.08
    • Groove resistance (kN) :5.94
    • Shear strenght (kN) :18.62

  • Leading-edge sector

    Bore range according to MA4017 standard

    360 Retaining Rings AFI037230127I10

    • Material :Stainless steel 1.4310
    • Housing diameter (mm) :37
    • External diameter of the ring (mm) :39.775 ±0.175
    • Width of the ring (mm) :2.97 ±0.10
    • Thickness of the ring (mm) :1.27 ±0.05
    • Groove diameter (mm) :39.4 ±0.10
    • Groove width (mm) :1.4 - 1.5
    • Groove resistance (kN) :21.62
    • Shear strenght (kN) :42.72

  • Standard range multiturn C75 Type steel

    Ondufil Wave Springs RD0705S860080XT

    • Material :Acier au Carbone type C75
    • Diameter min (mm) :69.5
    • Diameter max (mm) :56.5
    • Section Fil ~ (mm) :6.0 x 0.80
    • Number of waves :5.5
    • Number of turns :8
    • Free height ~ (mm) :18.4
    • Spring rate ~ (N/mm) :102
    • Shims ends (flat turns) :Nous consulter

  • Leading-edge sector

    Precision range multiturn C75 type steel

    Ondufil Wave Springs RP0705S860080XT

    • Material :Acier au Carbone type C75
    • Diameter min (mm) :69.5
    • Diameter max (mm) :56.5
    • Section Fil ~ (mm) :6.0 x 0.80
    • Number of waves :5.5
    • Number of turns :8
    • Free height H0 ~ (mm) :18.4
    • Working height H1 (mm) :14.5
    • Load P1 ±15% (N) :400
    • Shims ends (flat turns) :Nous consulter

  • Standard range mutliturn 17-7PH Stainless steel

    Ondufil Wave Springs RD0705S860080I68

    • Material :Acier Inoxydable 17-7 Ph 1.4568
    • Diameter min (mm) :69.5
    • Diameter max (mm) :56.5
    • Section Fil ~ (mm) :6.0 x 0.80
    • Number of waves :5.5
    • Number of turns :8
    • Free height ~ (mm) :18.4
    • Spring rate ~ (N/mm) :102
    • Shims ends (flat turns) :Nous consulter

  • C3 standard range 1.4310 stainless steel for bearing

    Borrelly Wave Washers C3260S - PFD258228150I10 - for bearing 6034 C3

    • Outer diameter of the bearing (mm) :260
    • Material :Acier Inoxydable 1.4311
    • Standard references for the bearing mounting :6034 C3
    • Diameter min (mm) :260
    • Diameter max (mm) :225.1
    • Material Thickness ±10% (mm) :2
    • Number of waves :6
    • Free height ~ (mm) :10.2
    • Working height H (mm) :3
    • Spring rate ~ (N/mm) :428.5

  • Leading-edge sector

    Precision range multiturn 17-7PH stainless steel

    Ondufil Wave Springs RP0705S860080I68

    • Material :Acier Inoxydable 17-7 Ph 1.4568
    • Diameter min (mm) :69.5
    • Diameter max (mm) :56.5
    • Section Fil ~ (mm) :6.0 x 0.80
    • Number of waves :5.5
    • Number of turns :8
    • Free height ~ (mm) :18.4
    • Working height H1 (mm) :14.5
    • Load P1 ±15% (N) :400
    • Shims ends (flat turns) :Nous consulter

  • Standard range multiturn C75 Type steel

    Ondufil Wave Springs RD0705S1060080XT

    • Material :Acier au Carbone type C75
    • Diameter min (mm) :69.5
    • Diameter max (mm) :56.5
    • Section Fil ~ (mm) :6.0 x 0.80
    • Number of waves :5.5
    • Number of turns :10
    • Free height ~ (mm) :22.7
    • Spring rate ~ (N/mm) :87
    • Shims ends (flat turns) :Nous consulter