Products

All sectors

  • Leading-edge sector

    Precision range multiturn 17-7PH stainless steel

    Ondufil Wave Springs RP0353S735030I68

    • Material :Stainless steel 17-7 Ph 1.4568
    • Diameter min (mm) :34.5
    • Diameter max (mm) :26.5
    • Section Fil ~ (mm) :3.5 x 0.30
    • Number of waves :3.5
    • Number of turns :7
    • Free height ~ (mm) :16.2
    • Working height H1 (mm) :5.4
    • Load P1 ±15% (N) :60
    • Shims ends (flat turns) :Please contact us

  • Leading-edge sector

    Precision range multiturn 17-7PH stainless steel

    Ondufil Wave Springs RP0373S1034048I68

    • Material :Stainless steel 17-7 Ph 1.4568
    • Diameter min (mm) :37
    • Diameter max (mm) :29.2
    • Section Fil ~ (mm) :3.4 x 0.50
    • Number of waves :3.5
    • Number of turns :10
    • Free height ~ (mm) :23.5
    • Working height H1 (mm) :13.4
    • Load P1 ±15% (N) :100
    • Shims ends (flat turns) :Please contact us

  • Leading-edge sector

    Precision range multiturn 17-7PH stainless steel

    Ondufil Wave Springs RP0444S634048I68

    • Material :Stainless steel 17-7 Ph 1.4568
    • Diameter min (mm) :44
    • Diameter max (mm) :36.2
    • Section Fil ~ (mm) :3.4 x 0.50
    • Number of waves :4.5
    • Number of turns :6
    • Free height ~ (mm) :13.9
    • Working height H1 (mm) :6.1
    • Load P1 ±15% (N) :230
    • Shims ends (flat turns) :Please contact us

  • Leading-edge sector

    Precision range multiturn 17-7PH stainless steel

    Ondufil Wave Springs RP0504S634048I68

    • Material :Stainless steel 17-7 Ph 1.4568
    • Diameter min (mm) :49.5
    • Diameter max (mm) :41.7
    • Section Fil ~ (mm) :3.4 x 0.50
    • Number of waves :4.5
    • Number of turns :6
    • Free height ~ (mm) :15.5
    • Working height H1 (mm) :4.9
    • Load P1 ±15% (N) :230
    • Shims ends (flat turns) :Please contact us

  • Leading-edge sector

    Precision range multiturn 17-7PH stainless steel

    Ondufil Wave Springs RP0554S540060I68

    • Material :Stainless steel 17-7 Ph 1.4568
    • Diameter min (mm) :54.5
    • Diameter max (mm) :45.5
    • Section Fil ~ (mm) :4.0 x 0.6
    • Number of waves :4.5
    • Number of turns :5
    • Free height ~ (mm) :15.7
    • Working height H1 (mm) :9.5
    • Load P1 ±15% (N) :240
    • Shims ends (flat turns) :Please contact us

  • Leading-edge sector

    Precision range multiturn 17-7PH stainless steel

    Ondufil Wave Springs RP0604S540060I68

    • Material :Stainless steel 17-7 Ph 1.4568
    • Diameter min (mm) :59.5
    • Diameter max (mm) :50.5
    • Section Fil ~ (mm) :4.0 x 0.60
    • Number of waves :4.5
    • Number of turns :5
    • Free height ~ (mm) :17.1
    • Working height H1 (mm) :9.8
    • Load P1 ±15% (N) :230
    • Shims ends (flat turns) :Please contact us

  • Leading-edge sector

    Precision range multiturn 17-7PH stainless steel

    Ondufil Wave Springs RP0654S455070I68

    • Material :Stainless steel 17-7 Ph 1.4568
    • Diameter min (mm) :64.5
    • Diameter max (mm) :52.5
    • Section Fil ~ (mm) :5.5 x 0.70
    • Number of waves :4.5
    • Number of turns :4
    • Free height ~ (mm) :10.7
    • Working height H1 (mm) :7.2
    • Load P1 ±15% (N) :230
    • Shims ends (flat turns) :Please contact us

  • Leading-edge sector

    Precision range multiturn 17-7PH stainless steel

    Ondufil Wave Springs RP0703S660080I68

    • Material :Stainless steel 17-7 Ph 1.4568
    • Diameter min (mm) :69.5
    • Diameter max (mm) :56.5
    • Section Fil ~ (mm) :6.0 x 0.80
    • Number of waves :3.5
    • Number of turns :6
    • Free height ~ (mm) :17.5
    • Working height H1 (mm) :12.9
    • Load P1 ±15% (N) :100
    • Shims ends (flat turns) :Please contact us

  • Standard range single turn overlap C75 type steel for bearing

    Ondufil Wave Springs OJ68 - RD0684J155070XT - for bearing 6008

    • Outer diameter of the bearing (mm) :68
    • Material :Carbon Steel type C75
    • Standard references for the bearing mounting :6008
    • Diameter min (mm) :68
    • Diameter max (mm) :56.4
    • Section Fil ~ (mm) :5.5 x 0.70
    • Number of waves :4
    • Free height ~ (mm) :4.3
    • Working height H (mm) :2.8
    • Spring rate ~ (N/mm) :125
    • Working height min :2 wire thickness

  • Standard range single turn overlap 17-7PH Stainless steel for bearing

    Ondufil Wave Springs OJ28S - RD0283J126045I68 - for bearing 6001

    • Outer diameter of the bearing (mm) :28
    • Material :Stainless steel 17-7 Ph 1.4568
    • Standard references for the bearing mounting :6001
    • Diameter min (mm) :28
    • Diameter max (mm) :22.4
    • Section Fil ~ (mm) :2.6 x 0.45
    • Number of waves :3
    • Free height ~ (mm) :3.4
    • Working height H (mm) :2
    • Spring rate ~ (N/mm) :55
    • Working height min :2 wire thickness

  • Standard range single turn overlap 17-7PH Stainless steel for bearing

    Ondufil Wave Springs OJ85S - RD0854J160080I68 - for bearing 6209

    • Outer diameter of the bearing (mm) :85
    • Material :Stainless steel 17-7 Ph 1.4568
    • Standard references for the bearing mounting :6209
    • Diameter min (mm) :85
    • Diameter max (mm) :72
    • Section Fil ~ (mm) :6.0 x 0.80
    • Number of waves :4
    • Free height ~ (mm) :5.3
    • Working height H (mm) :2.8
    • Spring rate ~ (N/mm) :106
    • Working height min :2 wire thickness

  • Standard range single turn gap C75 type steel for bearing

    Ondufil Wave Springs OU40 - RD0403U140060XT - for bearing 6203

    • Outer diameter of the bearing (mm) :40
    • Material :Carbon Steel type C75
    • Standard references for the bearing mounting :6203
    • Diameter min (mm) :40
    • Diameter max (mm) :31.4
    • Section Fil ~ (mm) :4.0 x 0.60
    • Number of waves :3
    • Free height ~ (mm) :3.1
    • Working height H (mm) :2
    • Spring rate ~ (N/mm) :94